MaxxModel CNC Aluminum Hopup Chamber MI PRO With LED (ICS CXP/CS4/EBB)
CNC Aluminum Hopup Chamber MI PRO With LED
For ICS CXP/CS4/EBB
CNC Aluminum Hopup Chamber MI Pro (with BB Latching System) & UV LED Tracer unit is precisely made to improve accuracy and ensure consistent air seal for ICS CXP/CS4/EBB (includes older models) M4/M16 AEG series.
The Hopup Chamber MI has a precision rotary dial design for fine hopup adjustments, re-engineered hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and true on every single shot.
The Hopup Chamber MI is designed to accept ICS stock nozzle, or nozzle length from 21.00mm to 21.25mm, and also fully compatible with stock bucking and most aftermarket soft and hard rubber buckings without losing FPS or dropping BBs.
The Hopup Chamber MI Housing is equipped with a new CNC Delrin Locking C-Clip design to hold the barrel tight without wobble or twisting, 3 compression springs have been added on top, at the bottom and in the center of the housing to ensure the unit is exactly centered, straight and air tight at all times when adapted to stock gear box or any V2 gear boxes with 11.5mm or 12mm inner bore.
More than that, the Hopup Chamber MI Pro is specially designed with a BB Latching System to prevent dropping BBs after removing the magazine. The Latching System can manually be opened to release BBs from inside hopup chamber.
The Dual UV LED Boards and Module set is also included with this hopup chamber unit to use with tracer BBs. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad).
***Test results: FPS might be increased by 10FPS to 30FPS over stock setup. Please check your FPS!
|1 x CNC Aluminum Hopup Chamber MI Pro (with BB Latching System) unit|
|1 x Dual UV LED Boards and Module set|
|2 x Strong Clear Vinyl Cover set|
|1 x CNC Aluminum Standard-Hop Arm|
|1 x CNC Aluminum R-Hop Arm|
|1 x Silicone Rubber Standard-Hop Nub Damper|
|1 x Silicone Rubber R-Hop Nub Damper|
|1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub|
|1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub|
|1 x CNC Brass Threaded Slot Pin|
|1 x CNC Delrin Locking C-Clip|
|1 x CNC Barrel Brass Spacer|
|1 x Brass Spacer Holder Oring|
|3 x Steel Compression Spring|